The Sun & Snow project gallery
A closer look at the work.
Explore roofing transformations, local repairs, skylights and the details behind each roof. Browse matched project stages or look through the full collection below.

Shingle rooflines and chimney
A wide view of grey shingles, intersecting rooflines and the flashing around a brick chimney.

Warm-toned shingles by the water
Brown shingles across several roof slopes beside the water; tools remain on site in this work photo.

Intersecting roof details
A roof-level view of shingles, valleys, a skylight and chimney details, with work still underway.

Open valley detail
Grey shingles meet an open metal valley, with a box vent on the adjacent slope.

Hip roof and vent detail
A close look at the shingle pattern, hip caps and box vent on a residential roof.

Residential shingle rooflines
Dark shingles above white siding, photographed while site work was still in progress.

Roofing during home construction
Shingle roofing on a home under construction, before the exterior cladding is installed.

Shingles around a skylight
A residential roof with a skylight and chimney; work lines remain visible in this progress photo.

Metal panel installation
Metal roof panels partway through installation, with underlayment and tools visible at the working edge.

Metal roof details indoors
Metal roof sections and flashing details photographed during work inside a workshop.

Red metal roof in progress
Red metal panels on the upper roof while work continues on the lower slope.

Metal roofing on a log building
A metal roof taking shape above a log building, with one section of underlayment still exposed.

Red metal rooflines
Red metal roof panels above an unfinished building and its lower porch roof.

Shingle and flashing work
Work in progress around a chimney and a covered roof opening, with underlayment and flashing pieces visible.

Roof replacement underway
A roof replacement underway, showing installed shingles, exposed underlayment and material staging.

Roof deck preparation
A view beneath the roof covering during work on the deck, with framing, insulation and new sheathing visible.

Membrane roof and vent
A membrane roof surface and the detail around a round metal roof vent.

Membrane preparation in progress
A low-slope roof during membrane preparation, with fasteners and unfinished sections visible.

Low-slope roof work
Work across a low-slope roof, showing membrane layers, roof-deck work and materials on site.

Exterior roofline
An exterior view of a building's roofline and cladding; the roof surface is not visible from this angle.

Worn roofing before replacement
The earlier roof covering before the red metal installation, showing worn shingles above the existing lower roof.

Red metal panels on the upper roof
The same building during replacement: red metal panels cover the upper roof while work continues on the lower slope.

Cedar shake removal around a skylight
Cedar shake removal at the skylight-roof home before re-sheeting and new shingles, with old roofing still visible.

New shingles around a dormer
New shingles cover the previously exposed roof deck around the dormer and skylight; site equipment remains in place.

New skylight and flashing detail
New skylight and re-flashing work on an existing green metal roof, showing the flashing above and beside the unit.

Skylight re-flashing on a metal roof
A detail view from the skylight replacement and re-flashing work, with the surrounding metal roof visible.

Metal roofing on a small barn
Metal roof panels follow the two pitches of a small barn roof above the existing timber building.

Fan-vent re-flashing in Campbell River
A close view from a Campbell River repair to re-flash leaking fan vents on an existing metal roof.

Fan vent below the roof ridge
The vent position and surrounding roof panels from the Campbell River fan-vent re-flashing work.

Metal flashing around a fan vent
Flashing detail from the Campbell River fan-vent repair. The separate pipe is visible for roof context.

Fan-vent repair in its roof setting
A wider view of the fan-vent re-flashing work in Campbell River; the adjacent skylight and pipes show the surrounding roof layout.

Chimney encasement in Campbell River
Chimney encasement from a Campbell River project that also included re-screwing the existing metal roof.

Metal roof re-screw work
The connected roof slopes from the Campbell River chimney encasement and metal roof re-screw project.

Chimney and metal roof overview
A wider view of the chimney encasement and surrounding metal roof from the Campbell River repair work.

Fasteners across the roof slopes
Roof panels, hip flashing and visible fasteners during the Campbell River metal roof re-screw work.

Green metal roof overview
An overview of the existing green metal roof and encased chimney from the Campbell River project.

IKO Cambridge shingles in Courtenay
IKO Cambridge shingle roofing in Courtenay, showing the roof slopes, vents and valley details.

Cedar shake removal underway
Cedar shake removal on a roof with intersecting gables, exposing the roof deck ahead of re-sheeting.

Re-sheeting an intersecting roof
Re-sheeting during the cedar shake conversion, with plywood covering the roof slopes before the next roofing layers.

Shingles taking shape after cedar removal
Shingle installation after cedar removal and re-sheeting. The foreground still contains underlayment, loose materials and tools.

Re-sheeting the skylight-roof home
New plywood and sections of underlayment during re-sheeting at the skylight-roof home; removal work continues at the far edge.

Underlayment across the skylight roof
The same skylight-roof home during preparation for shingles, with underlayment across the main roof and lower garage roof.
Select a photo to enlarge it. Colours vary with lighting and screens; confirm your selected product and colour before ordering.
A closer look at local repairs
Project details from Campbell River.
Look beyond the surface
Explore the details by collection.
Start with a conversation
See something you like?
Tell us which photo caught your eye. We can discuss how a similar material or appearance might fit your own roof.





